爱乐彩票平台In order to facilitate the majority of agricultural machinery users to correctly use the hydraulic two-way inverted plough, solve the user's difficulties in use, Heilongjiang Agricultural Reclamation Hengyun Agricultural Machinery Manufacturing Co。, Ltd。 in years of after-sales service summarized some practical adjustment experience。 This paper introduces some adjustment methods in the correct use of hydraulic bidirectional turnover plough。

1) proper suspension method。 Before tillage, the hydraulic two-way overturning plough is suspended by three points, and the two-point downward lifting arm is installed behind the two pulling ears of the plough, and then the central pulling rod is hung。 The center of the plough should be adjusted in the center of the tractor。 The method is to adjust the inside dimensions of two lifting arms and tractor tyres to be symmetrical and equal, and then tighten the zipper nuts on both sides to prevent irregularity of ridge closure when ploughing。

2) adjust the central pull rod. Before adjusting, plough the ground first and return to the tractor to adjust the tractor tire. If the front share is deep, the rear share is shallow. On the contrary, relax the central pull rod, so that the plough rack back deep, shallow front, tighten the central pull rod, so that the plough rack before and after the parallel.