Heilongjiang Nongken Hengyun Agricultural Machinery Manufacturing Co., Ltd.
Recruitment agents everywhere
Contact: Mr. Song
Address: Shuguang farm, Huanan County, Heilongjiang province.
爱乐彩票平台The consistency of tillage depth should be paid attention to in the course of using tillage plough, so as to achieve deep tillage and break the bottom of the plough。 In order to meet the requirements, it is often necessary to do an in-depth investigation before the operation of the plough, for the machinery itself to do a comprehensive and effective inspection is a protection of the machinery itself。
1. The overturning plough must be maintained and used by a special person who is familiar with the performance of the subsoiler, the structure of the machine and the adjustment method and use of each operation point.
2。 Before turning the plough, check the bolts of each part and prevent loosening。 Check all parts of the grease, not enough to be added in time to check the wear and tear of vulnerable parts。
3, in the plough operation, the spacing of subsoiling should be kept consistent。 Homework should be kept straight and uniform。
4, homework should be guaranteed not to be heavy, loose, and not heap。
5, the operation should be checked at any time and found that the machine should be cleaned up in time。
6。 If there is abnormal sound in the operation of the overturning plough, the operation should be stopped in time, and the operation should be continued until the cause is found out and solved。
7。 When the machine is working, it is found that there is a sharp increase in hardness and resistance, please immediately stop operation, eliminate the bad situation, and then proceed to operation;
8. In order to ensure the service life of the tilting plough, it should be carried out slowly when the machine enters and excavates the soil, and not be forced to operate it.
9, equipment operation for a period of time, should conduct a comprehensive inspection, found fault timely repair.
After adjusting one side of the plough, the other side should be adjusted in the same way, so as to achieve the same effect of ploughing depth. This requires us to patiently and meticulously do a good job of preparation before the operation, as far as possible to grasp the efficiency of the use of the tilting plow.